[WOOJIN] Carbide Saw Blade UJ - R16 - 120 (405*25.4*120P*3.0T)

[WOOJIN] Carbide Saw Blade for Aluminum UJ - A09 - 100 225*25.4*100P*2.4T

MPN UJ - A09 - 100

[WOOJIN] Tile Boring Bit UJ - TBS080B 8MM

Excellent drilling capability for hardened materials that are difficult to work with using conventional methods, such as reinforced tiles, polished tiles, and natural stones (marble, granite). · Drilling time is reduced with higher rotation speeds (2, 000 - 11, 000rpm). Improved economy through separation of bit and shank. Contributes to maintaining workplace cleanliness by adopting a water pressure adjustable handle. Superior drilling performance due to the adoption of high - strength diamond f

MPN UJ - TBS080B

[WOOJIN] Hex Socket Head Cap Screw 402 - 5059 8mm Dia * 3mm

MPN 402 - 5059

[WOOJIN] Carbide Saw/ Woodworking UJ - R16 - 60 (405*25.4*60T*3.0T)

Press Machining (stamped by applying strong downward force): Unlike laser processing which can cause thermal deformation, press machining eliminates thermal deformation. Grinding Machining (tip surface treatment): While press machining's strong pressure can cause deformation or denting on one side, grinding ensures left - right balance, a clean and meticulous appearance, and precise work. Elasticity: Upon startup, the machine's RPM rises to approximately 5, 500, at which point air resistance...

MPN UJ - R16 - 60

[WOOJIN] Carbide Saw Blade for Aluminum UJ - A09 - 80 225*25.4*80P*2.4T

MPN UJ - A09 - 80

[WOOJIN] Carbide Saw/ Woodworking UJ - R10 - 40 255*25.4*40P*2.4T

Press Machining (stamped by strong downward force): Laser machining may cause thermal deformation, but press machining does not. Grinding Machining (surface treatment of tip): Since press machining applies strong pressure, one side may be dented or deformed, but grinding work balances left and right, and the appearance is neat and meticulously finished. Elasticity: At the start, the machine's RPM rises to about 5, 500, and at this time, air resistance

MPN UJ - R10 - 40

[WOOJIN] Tile Boring Water Feeder UJ - TBH100G for Grinder

1. The faster the drill (2, 000~11, 000rpm) rotates, the shorter the work time. 2. Improved economy through separation of bit and shank. 3. Contributes to maintaining workplace cleanliness by adopting a water pressure adjustable handle. 4. Excellent drilling performance due to the adoption of high - strength diamond for the bit. 5. Minimizes shaft runout through double heat treatment of the shank. 6. Minimizes rust through special plating treatment. For Grinder

MPN UJ - TBH100G

[WOOJIN] Carbide Saw Blade for Aluminum UJ - A09 - 60 225*25.4*60P*2.4T

MPN UJ - A09 - 60

[WOOJIN] Carbide Saw Blade for Aluminum UJ - A18 - 120 455*25.4*120P*4.0T

MPN UJ - A18 - 120