[DAEHAN CARBON] Air Gouging Rod 12 DC 305 12mm*305mm (800A)

[DAEHAN CARBON] DAEHAN CARBON Brasting Carbon Rod (Economy Type) 19 GBD 305 (OEM) 19mm*510mm (1000A)

Faster work speed than other methods, improving workability and reducing costs.

MPN 19GBD305(OEM)

[DAEHAN CARBON] DAEHAN CARBON Brass Carbon Rod (Economy Type) 13 GBD 510 (OEM) 13mm*510mm (1000A)

Faster work speed leads to higher workability and cost savings compared to other methods.

MPN 13GBD510(OEM)

[DAEHAN CARBON] [DAEHAN CARBON] Underwater Gouging Rod 8 SG 305 8mm*305mm

Auxiliary equipment required during use includes general gouging equipment and diving gear. Used for cutting base metal in underwater environments such as rivers, lakes, and seawater.

MPN 8SG305

[DAEHAN CARBON] Brasting Carbon Rod (Economy Type) 16 GBD 510 (OEM) 16mm*510mm (1000A)

Faster working speed leads to higher workability and cost savings compared to other methods.

MPN 16GBD510(OEM)

[DAEHAN CARBON] DAEHAN CARBON Air Gouging Rod 5 DC 305 5mm*305mm(800A)

Low consumption and electrical resistance, stable and uniform quality due to the use of carefully selected raw materials. Burns smoothly. Gouging on the back of welded parts, inspection and removal of weld defects, cutting. Removal of defective holes and excess welds, etc.

MPN 5DC305

[DAEHAN CARBON] [DAEHAN CARBON] Air Gouging Carbon Rod (Economy Type) 10 DC 305 (OEM) 10mm*305mm (800A)

Gouging rods are used when a machining surface is required for post - processing of steel plates and cast iron using an electric arc.

MPN 10DC305(OEM)

[DAEHAN CARBON] Air Gouging Carbon Rod (for 800A) 6.5Φx305mm

MPN (800A)

[DAEHAN CARBON] DAEHAN CARBON Brasting Carbon Rod 13 GBD 355 13mm*355mm(1000A)

Fast working speed, resulting in higher workability and cost savings compared to other tasks. Minimal impact on the base metal. Low consumption rate, excellent arc stability, and low noise. Used for removing attachments from cast products' gates, runners, and welds.

MPN 13GBD355

[DAEHAN CARBON] Air Gouging Rod 10 DC 305 10mm*305mm(800A)

Low consumption and electrical resistance, stable and smooth burning due to carefully selected raw materials, and uniform quality. Gouging the back of welds, inspection and removal of defective weld areas, cutting. Removal of defective holes and excess welds, etc.

MPN 10DC305